Click image to view full size image
Introduction:
BEVS1301 Pencil Tester complies with the
requirements of ASTM D3363 and ISO15184
standard, through leaving a superficial trace
on the dry coating film with a certain pencil
hardness, the surface will be variably damaged
by the hardest pencil to evaluate pass/fail or
hardness . Recommend to apply on the smooth
film surface. Use variety of different hardness
pencils,the angle between pencil and the coated
surface is 45°, scratch on the coated surface under
a certain of force, the scratch resistance hardness
of the coating is the pencil hardness which just
scratched the coating.
Technical Specification:
Pressure of Pencil Tip: 1000/750 /500g
The angle between pencil and film surface is 45°
Three points are touched on the tested
surface ( roller, pencil tip)
Scratch Speed: 1 mm/ sec
Hardness Class:
Standard pencil: A set of Mitsubishi pencil( 14pcs from 6B to 6H)
Other brand pencils are available upon request ( Option)
Order Information:
BEVS 1301/500 P encil Hardness Tester (500g)
BEVS 1301/750 P encil Hardness Tester (750g)
BEVS 1301/1000 P encil Hardness Tester (1000g)
E-mail: